325L Excavator Travel Motor 325L Final Drive

Nlim (oil):3,400 rpm; Minimum Buy Quantity:N/A; E:185.5 mm; EAN:4547359121810; Min operating temperature, Tmin:-40 °C; F:129.5 mm; Fatigue limit load, Cu:53.7 kN; Static load, C0:505 kN; D:215 mm; Category:Roller Bearings;

C:22.36 kN; T max.:100 °C; J:80 mm; C0:11.5 kN; B:34.9 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.33 kg; B1:46.8 mm; H3:80; e:9 mm;

e:15 mm; d1:27.2 mm; d:15.88 mm; A1:11 mm; B1:28.6 mm; T max.:100 °C; L:57 mm; A2:37.1 mm; B:19.1 mm; S:6.5 mm;

Designation of housing:FL307-; T max.:200 °C; S:19 mm; Weight:1.77 kg; s1:24 mm; C0:19.2 kN; d:31.75 mm; A2:49 mm; T min.:-20 °C; H:185 mm;

e:15 mm; d1:27.2 mm; d:15.88 mm; A1:11 mm; B1:28.6 mm; T max.:100 °C; L:57 mm; A2:37.1 mm; B:19.1 mm; S:6.5 mm;

da min:65 mm; Dynamic load, C:16.4 kN; Characteristic rolling element frequency, BSF:10.05 Hz; ra max:1 mm; Max operating temperature, Tmax:110 °C; Characteristic inner ring frequency, BPFI:9.34 Hz; d:60 mm; D:85 mm; Nlim (grease):4,300 rpm; da max:66.5 mm;

H:76.2 mm; T max.:100 °C; C:57.2 kN; N1:29 mm; B1:65 mm; Weight:6.12 kg; J:203 mm; L1:77 mm; d:60 mm; d1:85 mm;

Bearing Material:[Steel] Steel; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Width T(mm):50;

e:15 mm; d1:27.2 mm; d:15.88 mm; A1:11 mm; B1:28.6 mm; T max.:100 °C; L:57 mm; A2:37.1 mm; B:19.1 mm; S:6.5 mm;

Days to Ship:8 Days; Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Surface Treatment:No; Machining:Steel plate cover mo; Accessory:No Cover; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Bearing Unit, Type:Diamond Flange Shape;

C:22.36 kN; T max.:100 °C; J:80 mm; C0:11.5 kN; B:34.9 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.33 kg; B1:46.8 mm; H3:80; e:9 mm;

s1:32.55 mm; T min.:-20 °C; C:52.5 kN; Recommended tightening torque for set screw:22 Nm; d:60 mm; J:193.7 mm; B:65.1 mm; Designation of housing:PLE212N-; G:M6x1; H:68.3 mm;

Bearing Material:[Steel] Steel; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Width T(mm):50;

C:22.36 kN; T max.:100 °C; J:80 mm; C0:11.5 kN; B:34.9 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.33 kg; B1:46.8 mm; H3:80; e:9 mm;

s1:32.55 mm; T min.:-20 °C; C:52.5 kN; Recommended tightening torque for set screw:22 Nm; d:60 mm; J:193.7 mm; B:65.1 mm; Designation of housing:PLE212N-; G:M6x1; H:68.3 mm;