PC200-7 excavator generator 600-861-3410 generator assy

d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H2:41 mm; G:R1/8"; s1:19.05 mm; SW:3.18 mm;

d:20 mm; Weight:0.7 kg; J:95 mm; G:M6x1; H1:15 mm; H2:65 mm; s1:15.5 mm; B:31 mm; Designation of housing:P204N-; Dz:54 mm;

Designation of bearing:US202G2; Dz:46 mm; C:9.55 kN; N:M8; A1:19 mm; Weight:0.4 kg; T min.:-20 °C; J:48 mm; Recommended tightening torque for set screw:3.5 Nm; A:36 mm;

s1:34.1 mm; Weight:1.18 kg; G:M6x1; C:19.5 kN; T min.:-20 °C; N:M10; d:31.75 mm; A:48 mm; Designation of housing:PG206-; d1:44.1 mm;

RoHS:6; Bearing I.D. d(mm):25; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing Material:[Steel] Steel; Shape:Flange Type; Days to Ship:8 Days; Width T(mm):60;

Holder Symbol:No; Number of Raceway Ring Rows:Single Row; Load Direction:Radial; Seal, Shield Symbols:ZZ; I.D.(Ø):130; RoHS:6; Combination symbol:No; Outer Ring:With Outer Ring; Low Torque Specification:No; Type:Ball;

s1:34.1 mm; Weight:1.18 kg; G:M6x1; C:19.5 kN; T min.:-20 °C; N:M10; d:31.75 mm; A:48 mm; Designation of housing:PG206-; d1:44.1 mm;

Number of Bearings:Double; Bearing I.D. d(mm):20; Bearing Retained:No; Seals:ZZ (Double Shield); Bearing Retained:No; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6804; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize;

s1:34.1 mm; Weight:1.18 kg; G:M6x1; C:19.5 kN; T min.:-20 °C; N:M10; d:31.75 mm; A:48 mm; Designation of housing:PG206-; d1:44.1 mm;

Designation of bearing:US202G2; Dz:46 mm; C:9.55 kN; N:M8; A1:19 mm; Weight:0.4 kg; T min.:-20 °C; J:48 mm; Recommended tightening torque for set screw:3.5 Nm; A:36 mm;

s1:25.8 mm; T min.:-20 °C; G:M8x1; A2:33.6 mm; S:19 mm; H3:110; J:135 mm; N:14mm; Designation of bearing:UC210G2; A1:13 mm;

H:120 mm; L:320 mm; A5:24.6 mm; H2:61 mm; s1:42.9 mm; B:49.2 mm; C:35.1 kN; d1:67.2 mm; Recommended tightening torque for set screw:8 Nm; C0:23.2 kN;

d:20 mm; Weight:0.7 kg; J:95 mm; G:M6x1; H1:15 mm; H2:65 mm; s1:15.5 mm; B:31 mm; Designation of housing:P204N-; Dz:54 mm;

Designation of bearing:US202G2; Dz:46 mm; C:9.55 kN; N:M8; A1:19 mm; Weight:0.4 kg; T min.:-20 °C; J:48 mm; Recommended tightening torque for set screw:3.5 Nm; A:36 mm;