Excavator PC130-7 monitor excavator part 7835-10-5000 new part in stock

d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H2:41 mm; G:R1/8"; s1:19.05 mm; SW:3.18 mm;

Number of Raceway Ring Rows:Double Row; Shaft Bore Config.:Cylindrical Bore; Specifications/Environment:Standard; Type of momi removing:High tensile brass; Load Direction:Radial; Rolling Element Material:Steel; Basic Load Rating, Dynamic Rating(N):1890000; Inner/Outer Ring Material:Steel; d:300; Raceway Ring Shape:Self-aligning roller;

H:120 mm; L:320 mm; A5:24.6 mm; H2:61 mm; s1:42.9 mm; B:49.2 mm; C:35.1 kN; d1:67.2 mm; Recommended tightening torque for set screw:8 Nm; C0:23.2 kN;

Number of Bearings:Double; Bearing I.D. d(mm):20; Bearing Retained:No; Seals:ZZ (Double Shield); Bearing Retained:No; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6804; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize;

Number of Raceway Ring Rows:Double Row; Shaft Bore Config.:Cylindrical Bore; Specifications/Environment:Standard; Type of momi removing:High tensile brass; Load Direction:Radial; Rolling Element Material:Steel; Basic Load Rating, Dynamic Rating(N):1890000; Inner/Outer Ring Material:Steel; d:300; Raceway Ring Shape:Self-aligning roller;

Type:Bearings with Housin; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Width T(mm):10; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days;

Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Shape:Flange Type; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Width T(mm):50;

B:43.5 mm; Weight:3.6 kg; S:10.9 mm; H2:165 mm; T min.:-20 °C; L1:65 mm; A:70 mm; Recommended tightening torque for set screw:8 Nm; H1:22 mm; Designation of housing:PH210-;

d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H2:41 mm; G:R1/8"; s1:19.05 mm; SW:3.18 mm;

Type:Bearings with Housin; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Width T(mm):10; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days;

Number of Bearings:Double; Bearing I.D. d(mm):20; Bearing Retained:No; Seals:ZZ (Double Shield); Bearing Retained:No; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6804; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize;

Holder Symbol:No; Number of Raceway Ring Rows:Single Row; Load Direction:Radial; Seal, Shield Symbols:ZZ; I.D.(Ø):130; RoHS:6; Combination symbol:No; Outer Ring:With Outer Ring; Low Torque Specification:No; Type:Ball;

d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm; L1:225 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H2:41 mm; G:R1/8"; s1:19.05 mm; SW:3.18 mm;

Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Shape:Flange Type; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Width T(mm):50;

Designation of bearing:US202G2; Dz:46 mm; C:9.55 kN; N:M8; A1:19 mm; Weight:0.4 kg; T min.:-20 °C; J:48 mm; Recommended tightening torque for set screw:3.5 Nm; A:36 mm;